Heat Press Instructions

1) Trim before pressing (if needed)
If present, trim off any color registration strips and order ID information around your image using scissors. These will transfer to the garment if not removed.

2) Preheat the garment
Preheat the garment for 3–5 seconds to remove excess moisture.
Let the garment cool before placing the transfer.

3) Position the transfer
Place the transfer on the shirt white side down, image facing up.

4) Press
Press at 300°F for 15 seconds using very firm pressure.

5) Cool + Peel (Cold Peel)
Remove the garment from the press and let it stand until it is cool enough to peel.
Peel cold. Wait until the carrier sheet is completely cool before peeling.

6) Final press (recommended)
Cover the image with parchment paper and press again for 5 seconds.
You may also use a Teflon sheet, butcher paper, or tissue paper.

Troubleshooting:
If the image does not come off completely, repress with the film in place, let it cool, and peel again.

Care Instructions

  • Turn garment inside out

  • Machine wash cold

  • No bleach

  • No fabric softener

  • Do not dry clean or iron

  • Tumble dry low